This is the first tutorial that will show you step by step how to add a gimbal or drone quadricopter Cheerson CX20, also known as Quantum Nova. I would initially say that this tutorial is easy to follow, and it is primarily made for beginners, but those of you with some experience can also benefit from seeing it.
The Cheerson CX20, is a very popular drone, for their good market price and design that somewhat resembles the Phantom of DJI. The problem is that Cheerson offers no gimbal is drone quality and many of the gimbals in the market, require modifying the drone in one way or another. For this reason I want to show, in my understanding, which is ideal for you cards this drone.
The gimbal use in this video is called G-2D is manufactured by Walkera, a Chinese company, which produces drones, remote control helicopters and trucks / remote control cars. If you want to see more details on the gimbal. Look at my previous review here.
This tutorial requires the following:
Drone Cheerson CX 20.
G-2D gimbal Walkera.
Camera with the same dimensions as a GoPro.
Place the fitting at the base of the gimbal drone. The first thing is to ensure the piece arem holding you cards to drone. This piece has two holes where the screws will post fixed to the CX20.
Problem: The screws that come with the room are very thick and very small holes in the Cheerson. If we use the screws that come included with the Cheerson CX20 it is not possible because they are very corotos for the part.
Solution: There are two possible solutions. A and the ideal would be to purchase longer screws with the same diameter as that comes with the Cheerson CX20. Second solution, using sandpaper and make the finest piece. It's was the solution I used.
After you've placed the piece, we must connect the cables to the power output CX20. The CX20 has several outlets all clearly marked with the voltage. Those who use it to feed the gimbal are the S1 and S2 both 5V outputs. This output connect the three-pin cable that comes with the gimbal or gimbal.
For those of you who have iLook Plus cameras or cameras with no internal battery:
This section is for those of you who want to connect a camera or a camera iLook Plus without internal battery.
To do this we can use the 12V output jack quadricopter Cheerson CX20. First we need a JST female connector to power the camera.
Problem: The iLook Plus Walkera camera does not come with a male connector.
Solution: Cut the wires and a small outlet soldarle JST, which can get a LiPo battery. In this way the camera is to be able to feed directly from the battery of drone.
Well, this concludes the first part of the tutorial "How to add a gimbal Cheerson CX20 drone". The second part of my tutorial which prove that such works as the gimbal can be calibrated are not lost.
If something FPV accessories needed, such as, Cheerson CX-20 FPV Set, Eachine LCD5802D Monitor, you can take a shopping at Banggood, which is the wholesale platform and it will offer you the fordable prices.
没有评论:
发表评论